Jwin JS-P75 User Manual

Page 2

Advertising
background image

INTRODUCTION

The JS-P75 is a conveniently-packaged portable speaker system suitable for
CD players, MP3 players, portable cassette decks, and personal computers.
While the unit typically operates with the speakers separated, it can be closed
for ease of carrying, and can also be operated while closed, requiring very little
desk space (see

POWER SOURCE, below).

POWER SOURCE

The JS-P75 can be powered by either four (4) AAA batteries or by an AC power
adapter (purchased separately, see below).

If an AC power adapter is used (see Using an AC Adapter, below), the
unit cannot be operated when in the closed condition.

The numbers in parentheses, below, are used to identify product parts. Refer to
the product diagram.

Installing Batteries

1. Push the

BATTERY DOOR RELEASE (7) in the direction indicated by the

arrow, and lift the battery compartment cover.

2. Insert 4 AAA size batteries into the compartment, following the polarity

markings (+ and

–) on the case.

3. Gently close the battery compartment door until it snaps shut.

Using an AC Adapter

1. Your JS-P75 will accept an AC adapter, as long a

s

i

t

s

capable of

providing 6 Volts DC with at least 500 milliamps of current (6 VDC @
500mA)

.

The

adapt

er

s

DC plug must also fit into the JS-

P75’

s

DC POWER

INPUT JACK (4), and provide the polarity shown on the unit. AC adapters of
this type may be purchased at most consumer electronics stores.

2. Plug

t

he

AC

adapt

er

s

DC

pl

ug

i

nt

o

t

he

uni

t

s

DC POWER INPUT JACK (4),

and then plug the AC adapter into a convenient wall outlet.

Important

For the JS-P75 to operate on installed

bat

t

er

i

es,

t

he

AC

adapt

er

s

DC

plug must be disconnected

f

r

om

t

he

uni

t

s

DC POWER INPUT JACK (4).

When

t

he

uni

t

wi

l

l

not

be

used

f

or

l

ong

per

i

ods,

i

t

s

best

t

o

r

emove

t

he

optional AC adapter from the wall outlet and the batteries from the
JS-P75.

USING THE SPEAKERS

1. Gently open the unit by separating the

LEFT (5) and RIGHT (6) SPEAKERS.

2. Depress the

POWER ON/OFF BUTTON (1). The POWER-ON LED (2) will light.

3. Plug the black Audio Plug from the JS-P75 into the Audio Output jack of the

chosen audio device (e.g. CD Player, MP3 Player, Cassette Deck, PC) to
which you wish to listen. The jack on the audio device must be a standard
3.

5mm

(

1/

8”

)

st

er

eo

out

put

j

ack.

4. Play the audio device and adjust the

VOLUME CONTROL KNOB (3) on the

JS-P75 for the desired listening level.

J

S

-P

7

5

P

o

rt

a

b

le

S

p

e

a

k

e

r

S

y

s

te

m

Advertising