JVC HR-A592UC - Manual (Page 6)

Setting channels automatically
– Auto Channel Memory
The VCR can receive a maximum of
181 channels by presetting the
channels into memory.
Access Menu screen, then CH
Setup screen
Press MENU on the Remote. Press
SET –/+
to select “CH SETUP”, then
press ENTER.
Perform Auto Channel Memory
Press SET –/+ to select “AUTO CH
MEMORY”, then press ENTER.
Complete Auto Channel Memory
The auto tuning will start. The
channel display will count up and
when finished, the screen returns to
normal.
– Initial Settings –
Tuner Setting
This VCR is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels. Before
selecting channels, they must be programmed into the VCR’s
memory. In addition to normal VHF and UHF channels, this
VCR can receive up to 113 Cable TV channels. To use this
VCR with an antenna, set the TV/CATV menu option to the
TV mode. When shipped from the factory, this menu option
is in the CATV mode.
〈+/-/ENTER/MENU〉
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+0
1
2
3
1
2
Press MENU twice to return to normal screen.
〈+/-/ENTER/MENU〉
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
TV - VHF/UHF channels
CATV - CABLE TV channels
Perform TV/CATV Selection
Press SET –/+ to select “TV/CATV”,
then press ENTER to select the TV
or CATV mode. The arrow indicates
the selected mode.
〈+/-/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
〈+/-/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
– TV/CATV Selection
Access Menu screen, then CH
Setup screen
Press MENU on the Remote. Press
SET –/+
to select “CH SETUP”, then
press ENTER.
Access Menu screen
Press MENU on the Remote. Press
SET –/+
to select “SYSTEM SETUP”,
then press ENTER.
〈+/-/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
Set month, day, year and time
Press SET –/+ until the desired month
appears, then press ENTER. Set the
day, year and time in the same way.
Start clock
Press MENU to return to normal
screen.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change
blinks, then press SET –/+.
1
3
4
NOTE:
After a power failure or disconnection of the power, the
timer settings will be lost. In this case, reset the present time.
Access Clock Set screen
Press SET –/+ to select “CLOCK SET”,
then press ENTER.
2
Manual Clock Setting
Press SET –/+ to select your time zone, then press
ENTER
.
ATLANTIC : GMT – 4 hours
(GMT: Greenwich Mean Time)
EASTERN : GMT – 5 hours
CENTRAL : GMT – 6 hours
MOUNTAIN : GMT – 7 hours
PACIFIC
: GMT – 8 hours
ALASKA : GMT – 9 hours
HAWAII : GMT – 10 hours
AUTO : AUTO SET
Press MENU twice to return to the normal screen.
NOTE: To be able to select the standard time, the clock must
first be set by “AUTO CLOCK” once.
5
4
á+/-/ENTER/MENUñ
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
ON OFF
CLOCK SET
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
SYSTEM SETUP
MONTH
DAY
TIME
YEAR
3
1
12
(SAT)
: 0 0 AM
20 0 3
á+/-/ENTER/CANCEL/MENUñ
MONTH
DAY
TIME
YEAR
3
2 6
8
(WED)
: 3 0 AM
20 0 3
á+/-/ENTER/CANCEL/MENUñ
4F90201A/Cov-07 11/15/02, 03:56 PM 6