JVC CATD77 - Manual (Page 16)

12
English
S.E.A. Mode
The System has some preset sound effects that give you control of the way your music sounds, so you can
tailor it for your room and for the quality of the source. We can give you some idea of how each one
affects the music, but the only way to really tell is to try them yourself.
You can also create up to three of your own customized S.E.A. (Sound Effect Amplifier) settings and store
them in the unit’s memory.
S.E.A. Mode effects cannot be recorded.
S.E.A. effect modes
ROCK Boosts low and high frequencies.
POP Good for vocal music.
CLASSIC Set for wide and dynamic sound stereo systems.
Selecting a S.E.A. Effect Mode ——————————————
Press the SEA button (or the SEA MODE button on the Remote
Control).
The “SEA” indicator on the display lights up.
The display changes with each press of the button as shown below.
= ROCK = POP = CLASSIC = MANUAL 1 = MANUAL 2 = MANUAL 3 = OFF = (back to
the beginning)
The name of the effect appears on the display, then returns to the previous display after a few seconds.
If you want to see the name of the selected mode, press the SEA MODE button once. The name of the
currently selected mode appears on the display for a few seconds.
To cancel S.E.A. effect mode, select “OFF”. The “SEA” indicator goes out.
Customizing a S.E.A. Effect Mode —————————————
You can create up to three of your own customized S.E.A. settings and store them in the unit’s memory.
You can adjust the level of the LOW, MID, or HIGH tones.
You can change an existing sound mode to suit your own preferences by adding your own S.E.A.
effects to the existing effect. To create an S.E.A. effect from a flat level, perform the following steps
after selecting “OFF” for S.E.A. effect mode.
1. Press the MENU button.
The “TIMER” section of the menu display blinks.
2. Press the cursor key to the right or left ( 4 or ¢) and select
“SEA CONTROL”.
The display changes with each press of the cursor keys as shown below.
When a CD source is selected:
+ Press the left ( 4 ) cursor key
Ô TIMER Ô CD P.MODE Ô REPEAT Ô AUTO EDIT Ô SEA CONTROL Ô
Press the right ( ¢ ) cursor key =
When any other source is selected:
TIMER
Ô SEA CONTROL
3. Press the SET button.
“LOW 0 dB” blinks on the display.
•
If S.E.A. is already on, the low tones for the
selected S.E.A. MODE are displayed.
The level for the low tones of the S.E.A. effect appears on the display while the “SEA CONTROL”
indicator is lit.
SEA
SEA
MODE
SEA
MENU
TIMER
DAILY
SEA
CONTROL SEA
SEA
CONTROL SEA
SET
SEA
CA-TD77R[EF]/EN/p1-25 97.7.24, 3:15 PM 12