Tuning into a preset station – JVC KS-FX470R User Manual

Page 8

Advertising
background image

8

ENGLISH

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the
stations again.

Tuning into a preset station

You can easily tune into a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on page 7.

1

Select the band (FM1 – 3, AM).

2

Select the number (1 – 6) for the
preset station you want.

Manual preset

You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

1

Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).

2

Tune into a station (in this example,
of 88.3 MHz).

3

Press and hold the number button
(in this example, 1) for more than 2
seconds.

4

Repeat the above procedure to store
other stations into other preset
numbers.

To tune into stations of lower frequencies.

“P1” flashes for a few seconds.

FM1

FM2

FM3

FM1

FM2

FM3

AM

KS-FX473R
KS-FX470R

KS-F363R
KS-F360R

To tune into stations of higher frequencies.

EN06-08.KS-FX473[E]f

10/19/01, 9:00 PM

8

Advertising