John Lewis JLTDH15 - Manual (Page 13)

To deselect the function press the Alarm
button again. The LED above is off.
Time
Use the Time button to select the
programme duration after setting the Time
programme. You can select a programme
duration from 10 mins to 2 hrs in 10-minute
steps.
1. Turn the programme selector to the
Time programme. The flashing 10'
above the Time button is on.
2. Press the Time button repeatedly until
the desired programme duration is
shown in the display, e.g. 20 for a
programme of 20 minutes.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
Delay start
With the Delay start button, you can
delay the start of a programme by
between 30 minutes (30') and a
maximum of 20 hours (20h).
1. Select the programme and additional
functions.
2. Press the Delay start button as many
times as necessary until the required
Delay start appears on the display, e.g.
12h if the programme is to be started in
12 hours.
If the display is showing 20h and you
press the button again, the time delay
will be cancelled. The display will
show 0'and then the duration of the
selected programme.
3. To activate the delay timer, press the
Start/Pause button. The amount of time
remaining until the programme is set to
start is continuously displayed (e.g. 15h,
14h, 13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a
programme being accidentally started or a
programme in operation being accidentally
changed. The child lock function locks all
buttons and the programme selector. The
child lock can be activated or deactivated by
13