Troubleshooting, Power source, Operation – JVC 1203SKMMODJSC User Manual

Page 44: About images, About sound, About radio

Advertising
background image

40

When you encounter a problem that seems to be a
fault, check the following points before contacting
your JVC service center:

Power source

7

Power does not come on.

• The power cord is not connected to the main

unit or an AC outlet.

Connect the power cord correctly.
(

A page 11)

Operation

7

You cannot operate any button.

• Some specific operations may be inhibited

for some discs.

7

The remote control does not work.

• The dry-cell batteries have run out.

Replace the batteries. (

A page 6)

7

A disc cannot be played back.

• In the case of DVD VIDEO discs

Check the Region Code number of the
disc. (

A page 3)

• “PLAYABLE Err” is displayed on the display

window.
It is not a disc that can be played on this
system.

Check the disc type. (

A page 3)

• Parental Lock is set. (

A page 30)

About images

7

No picture appears.

• The SCART cable is not connected correctly.

A page 11

7

The picture is distorted.

• A VCR is connected between the main unit

and the TV set.

Connect the main unit directly to the TV
set. (

A page 11)

7

The screen size is abnormal.

• The screen size is set improperly.

Set “MONITOR TYPE” according to the TV
set you are using. (

A page 29)

7

The TV screen darkens.

• “SCREEN SAVER” is set.

If set, press any button. (

A page 29)

About sound

7

There is no sound.

• Speakers are not connected correctly.

A page 9

• The sound is muted.

A page 16

• “NO AUDIO” is displayed on the display

window.
The disc may have been produced through
illegal copying.

Confirm at the store where you bought the
disc.

7

The sound is weak compared with TV or Video.

• “DVD LEVEL” is set to “NOR”.

Set to other than “NOR”. (

A page 26)

7

The sound is distorted.

• The volume is turned up too high.

Turn down the volume. (

A page 16)

7

No sound comes out of the subwoofer.

• “SUB WFR” is turned off.

Press S.WFR OUT to turn on.
(

A page 10)

About radio

7

The sound is noisy while receiving./Receiving
is disabled.

• The antenna is not connected correctly.

Connect the antenna correctly.
(

A page 8)

Troubleshooting

EXA1[DOM].book Page 40 Monday, December 22, 2003 3:33 PM

Advertising