Jwin JD-VD762 - Manual (Page 19)

Portable DVD Player with 9” Active Matrix TFT LCD V11M11_IM_EN_05302008
www.jWIN.com - 17 -
OPERATIONAL INSTRUCTIONS
Basic Playback Operation-continued
9. PROGRAMMED PLAYBACK
This unit has 16 a track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. Program up to 16 tracks or program certain
tracks to play more than once. To perform programmed playback, proceed as follows:
• While
in the STOP mode, press the PROGRAM button. The program window will
appear on the screen.
• Press the numeric buttons to input 2 numbers for each track: one for title and the
other for chapter. After inputting 2 numbers, the cursor will automatically jump to the
next program track, awaiting the input of the next numbers.
• Repeat step 2 until all the desired titles and chapters have been programmed (up to
20). You can repeat a title and a chapter more than once if desired.
• Use the NAVIGATION buttons to select the START position, and then press the
PLAY button to begin the programmed play.
• To clear Programmed items, press the CLEAR button on the remote control. To clear
all items, select the Clear option from the menu and press the OK button on the main
unit or the ENTER button on the remote control.
• To cancel the program function, press the PROGRAM button.
10. ZOOM
This player can magnify a picture. Press the ZOOM button to zoom during normal, slow or
still playback mode. Use the Navigation Buttons to select the desired part of the zoomed
picture.
Note: This function only works with DVD and VCD discs.
11. ON SCREEN DISPLAY (OSD) INFORMATION
Press the DISPLAY button to show the elapsed and remaining time of the playing disc.
Each time the DISPLAY button is pressed, the time will change on the screen as follows:
• DVD: Title Elapsed Ö Title Remain Ö Chapter Elapsed Ö Chapter Remain Ö
Display Off
• VCD & CD: Single Elapsed Ö Single Remain Ö Total Elapsed Ö Total Remain Ö
Display Off
• MP3 CD: Single Elapsed Ö Single Remain Ö (Return)
12. AUDIO FEATURE
While playing a DVD or VCD, you can cycle between the audio modes. Press the AUDIO
button to cycle through the audio modes. The audio modes vary depending on the disc
inserted, but include MONO LEFT, MONO RIGHT, or STEREO.
13. MULTI-ANGLE VIEWING
Some DVD discs may contain scenes which have been shot simultaneously from a
number of different camera angles. This function depends on a disc.
•
Play a DVD disc that is recorded with multiple angles.
• Press the ANGLE button. If the disc contains different angled views, it will show the
movie with the chosen different angle.
• To return the normal angle view, press the ANGLE button again.
14. SUBTITLE FEATURE
Press the SUBTITLE button to select a subtitle language. To turn off the subtitle, press the
SUBTITLE button repeatedly. This feature is not available on all discs.