System connections, Connecting to a satellite receiver, Simple connections – JVC DR-MH50S User Manual

Page 68: Perfect connections (recommended)

Advertising

SYSTEM CONNECTIONS

Simple Connections

This is an example of a simple connection if your TV has one
21-pin AV input (SCART) connector.
Connect the satellite receiver to the [L-2 IN/DECODER] connector,
then connect the [L-1 IN/OUT] connector to the TV’s connector.

NOTES:

●

Set

AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 65)

●

You can use the Automatic Satellite Programme Recording
function (

A pg. 49) with this connection. (HDD deck only)

●

To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that

AL-2B appears on the front display

panel.

●

For details, refer to the instruction manual of the satellite receiver.

Perfect Connections (Recommended)

This is an example of recommended connections if your TV
has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector if you
have a decoder, [L-1 IN/OUT] connector to TV’s connector, and [L-
2 IN/DECODER] connector to the satellite receiver’s connector.
Then connect the satellite receiver and TV.

NOTES:

●

Set

AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 65)

●

You can use the Automatic Satellite Programme Recording
function (

A pg. 49) with this connection. (HDD deck only)

●

To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that

AL-2B appears on the front display

panel.

●

To receive a scrambled broadcast, descramble the signal with the
decoder connected to the satellite receiver.

●

For details, refer to the instruction manual of the satellite receiver
and decoder.

Connecting To A Satellite Receiver

IMPORTANT
When you set

AL-2 SELECTB to ASAT VIDEOB or ASAT

S-VIDEO

B (A pg. 65), it is possible to view a satellite broadcast

with the TV set to its AV mode even if the unit is turned off. When
the unit is in Stop mode or recording, press TV AV/VIDEO on the
remote control to turn off the VIDEO lamp on the unit.

●

If you turn on the unit when the satellite receiver’s power is off,
nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV AV/
VIDEO on the remote control to set the unit to the AV mode.

Outdoor unit

Satellite cable

Satellite receiver

Aerial

TV aerial cable

ANTENNA OUT

ANTENNA IN