Changing the sound and display settings – Sony CDX-C460 User Manual

Page 10

Advertising
background image

10

EN

Changing the sound and
display settings

You can set:
• CLOCK (page 5).
• D.INFO (dual information) to display the

clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).

• AUTO-DIM (Dimmer) to change the

brightness of the display.

— Select “AUTO” to dim the display only

when you turn the lights on.

— Select “ON” to dim the display.

• BEEP to turn the beep tones on or off.
• RM (Rotary Remote) to change the operative

direction of the controls of the optional rotary
remote.

— Select “NORM” to use the rotary remote

in the factory preset position.

— Select “REV” when you mount the

rotary remote on the right of the steering
column.

• A.SCRL (Auto Scroll) (page 11).

Note
If you connect an optional power amplifier and do not use
the built-in amplifier, the beep tone will be disabled.

1

Press (SHIFT).

2

Press (2) (SET UP) repeatedly until the
desired setting mode appears.

Each time you press (2) (SET UP), the item
changes as follows:

CLOCK n D.INFO* n AUTO-DIM n BEEP n
RM n A.SCRL*

*

When you have not tune the station or there is no
CD/MD being played, these items will not appear.

Note
The displayed item will differ depending on the source.

3

Press (4) (n) to select the desired
setting (for example: ON or OFF).

4

Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.

Boosting bass sound — D-bass

You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS dial. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass* function creates
even sharper and more powerful bass sound
than Analog D-bass.

*

Digital D-bass is available during CD playback.

Adjusting the bass curve

Turn the D-BASS dial to adjust the bass
level (1, 2 or 3).
“D-BASS” appears in the display.
During CD playback, “DIGITAL D-BASS”
appears in the display.

To cancel, turn the dial to the OFF position.

Note
The bass sound may distort at same volumes. If the bass
sound distorts, adjust the D-BASS dial or volume button.

Digital D-BASS

0dB

D-BASS 3

D-BASS 2

D-BASS 1

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Level

Analog D-BASS

Level

Frequency (Hz)

Frequency (Hz)

Advertising