Sanyo DP42647 - Manual (Page 17)

17
HDMI TO DVI CABLE
DVI TO HDMI INPUT1 CONNECTIONS (INCLUDES HDCP COPY
PROTECTION)—
Receiving the ultimate picture
HDMI INPUT1 CONNECTION: Connection Option 2
1 Connect the Set-top Box (STB) DVI Output to the
DTV’s HDMI INPUT1.
2 Connect the STB Audio out to the DTV’s
VIDEO3 Audio In L / R.
3
Press INPUT to select HDMI 1 to view the digital
program.
IMPORTANT FACT: Only the HDMI INPUT1 jack can
accept a DVI (digital video interface) signal.
Note:Check with your local electronics store for a DVI to
HDMI Adapter Cable that matches your equipment
and the DTV.
SET-TOP BOX
(or similar device)
❶
REMOTE CONTROL
❸
INPUT
❷
OPERATING TIPS:
◆Press the INPUT key after connecting cables
to access the HDMI1 input. There is NO need
to tune to a blank channel.
◆Use HDMI (DVI) INPUT1 to connect your DVI
device, make sure you connect Audio out to
the DTV’s VIDEO 3 Audio In.
◆The VIDEO 3 audio jacks are used to receive
the audio from the DVI device. These video
jacks cannot be used when a DVI device is
connected.
◆Refer to the owner’s manuals and user’s
guides that came with your external equip-
ment for connection options.
HELP HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jack. ● Check Audio / Video connections.
● Check external equipment
connections.
● Check external equipment setting.
● Press the INPUT key.
● Switch on external equipment.
● Set external equipment output
connections to match input
connections.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
AUDIO
CABLE
DTV HDMI INPUT1
(CABLES NOT
SUPPLIED.)