SECO-LARM USA Dummy Camera VD-10PL - Manual

®
D
UMMY
C
AMERA WITH
W
ORKING
IR LED
S
M
ANUAL ®
D
UMMY
C
AMERA WITH
W
ORKING
IR LED
S
M
ANUAL
MiDummyCamLEDs.pmd
Page 4
PICSN1 ® SECO-LARM ® U.S.A., Inc., 16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
E-mail: [email protected] Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Note: This dummy camera is to be used as a deterrent only.
®
VD-10PL
Dummy Camera
with Real Working IR LEDs
Installation Manual
SECO-LARM ® U.S.A., Inc.
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and
local laws.
SECO-LARM is not responsible for the use of this product in violation of any current laws or statutes.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM
reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2008 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or
copied, in whole or in part, without the written permission of SECO-LARM.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s
obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid,
to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse,
neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-
LARM determines that such equipment is not operating properly as a result of causes other than defects in
material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or
repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral,
incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.
• Check that the AC adapter is plugged into a power outlet.
• Check that the AC adapter is plugged into the dummy camera.
IR LEDs do not turn on
TROUBLE SHOOTING
Optional Accessories:
ST-UV12-S0.5A
EVA-F5521-3
12VDC, 500mA switching
output. 6-ft. cord with
2.1mm plug. UL listed.
Female DC jack
pigtail connector.
Included:
1 x Dummy Camera
1 x Sun shield
1 x Mounting bracket
3 x Mounting screws
3 x Plastic screw anchors
1 x Manual