Solid State Logic 82S6XR0A0B - Manual

Super-Analogue™ Outboard
X-Rack Mic Amp User’s Guide
This documentation package contains the User’s Guide for your new X-Rack Mic Amp
module. Depending on the age of your X-Rack, these pages may already be present in
your X-Rack Owner’s Manual – please check to see if these pages match your Manual.
If they do not, these pages should be filed alongside it.
Please Note. X-Rack units prior to serial number XRK0110 are not 100% compatible with the X-Rack Mic
Amp as these units can not provide +48V phantom power unless field retrofit kit 629620XR
has been fitted. This kit is available free-of-charge from your local distributor, if the X-Rack unit
concerned is in warranty. For units that are out of warranty a small charge will be made. The
absence of this kit is indicated by the buscard in the X-Rack being a ‘629620X1 RE 1’ (rev 1),
with a number of components (ie. ‘IC2’, ‘C4’, ‘L4’) missing.
For correct operation of Total Recall™, your X-Rack unit must be running V1.1/0 or later
software. Please refer to your X-Rack Owners Manual for instructions on how to check the
current software version and how to obtain and install a newer version if required.
There may be a newer version of the X-Rack Owner’s Manual available for download from our
website (
http://www.solid-state-logic.com )
82S6XR0A0B
Solid State Logic
S O U N D || V I S I O N
SUPERANALOGUE
X - R A C K