Samsung SCH-a610 - Manual (Page 21)

Understand your phone 13
1X Protocol : Indicates your phone is using the 1X protocol.
The 1X protocol is capable of high-speed data (3G).
IS95-2G Protocol : Indicates your phone is using the IS95-
2G protocol. This protocol is not capable of high speed data.
Vibrate mode : Indicates your phone is in vibrate mode. Your
phone vibrates upon receiving an incoming call.
Battery strength : Indicates the battery charge level. The
more black bars, the greater the charge. When the battery
becomes very low, a flashing empty battery icon displays
and the phone sounds an audible alert, which indicates your
phone is about to shut down.
Alarm clock : The alarm clock is set.
Ringer silent : Indicates that your phone’s ringer is set to
silent.
GPS (911 only): This icon represents Global Positioning
Service (GPS) for 911.
GPS : Indicates GPS is on for location.
Silent mode : Indicates your phone is in silent mode. Ringer
is silenced for all alerts, incoming calls, and incoming
messages. The phone alerts you of incoming calls, alerts, or
messages by vibration and a flashing Service LED.
Flash in use : Indicates the camera flash is set to On .
Self Timer in use : Self Timer delays the camera shutter for
5 or 10 seconds after you press the camera shutter button or
when snapping a picture.
Multi Shot in use : Multi Shot snaps multiple pictures after
the camera shutter button is pressed. The number of pictures
snapped is dependant upon the resolution setting.
MetroA610.book Page 13 Tuesday, July 6, 2004 3:12 PM