Sony DAV-HDX285 User Manual

Page 77

Advertising
background image

Contr

o

l f

o

r HDMI/

Extern

al A

u

dio

D

e

vic
e

77

GB

To control the system from the
S-AIR receiver

You can control the system from the S-AIR
receiver by using the following buttons.

For details, refer to the operating instructions of
the S-AIR receiver.

You can enjoy the S-AIR receiver while the unit
is in standby mode by setting “S-AIR STBY” to
“STBY ON.”

1

Press SYSTEM MENU.

2

Press

X/x repeatedly until “S-AIR

STBY” appears in the front panel
display, then press

or

c.

Note

• When the wireless transmitter is not inserted in

the unit, “S-AIR STBY” cannot be selected.

3

Press

X/x to select the desired setting.

• “STBY ON”: You can enjoy the S-AIR

receiver while the unit is in standby mode
or turned on. The power consumption
during the standby mode increases.

• “STBY OFF”: You cannot enjoy the

S-AIR receiver while the unit is in
standby mode.

The default setting differs depending on the
area.

4

Press .

The setting is made.

5

Press SYSTEM MENU.

The system menu turns off.

Note

• When you turn the system off while “S-AIR STBY”

is set to “STBY ON,” “S-AIR” flashes (when sound
transmission between the unit and S-AIR receiver is
not established), or lights up (when sound
transmission between the unit and S-AIR receiver is
established) in the front panel display.

It is easy to set the same ID for the unit and an
S-AIR sub unit, such as a surround amplifier or
S-AIR receiver, to establish sound transmission.
However, neighbors may also receive your
system’s sound if IDs are the same, or you may
receive sound from neighbors. To prevent this,
you can identify the unit with a specific S-AIR
sub unit by performing the pairing operation.

x Before pairing

Sound transmission is established by ID
(example).

Press

Operation

H, X, x,
./>

Share the same operations on the
remote and unit.

S-AIR CH

Change the function of the system.

Enjoying the S-AIR receiver
while the unit is in standby
mode

For the S-AIR receiver

Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)

For the surround amplifier
For the S-AIR receiver

This unit

ID A

ID A

S-AIR sub unit

ID A

S-AIR sub unit

Your room

Neighbor

Advertising