Soleus Air Ultra Thin Micathermic Heater HM1-10-32 - Manual (Page 6)

OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only
operate heater in upright position with caster wheels attached. Two controls dials; one to select
the power setting, and the other to select the desired temperature.
Power Indicator Light
Power Select Dial
Set Temperature Dial
1. Select a heat setting.
For LOW heat (500W), turn the POWER SELECT dial until it is aligned with LOW.
For HIGH heat (1000W), turn the POWER SELECT dial until it is aligned with HIGH.
For ECO Mode, turn the POWER SELECT dial until it is aligned with ECO.
ECO mode is an Economic Energy Saving Function - When the room temperature
reaches a certain point, the ECO mode will reduce the power consumption by 1/3 to
automatically to save energy.
2. Turn the thermostat control (SET TEMP. dial) clockwise as far as it will go. The
indicator light will light-up when the thermostat is set above the current room
temperature.
6