Listening to the radio, Preset tuning – Sony CMT-GP8D User Manual

Page 25

Advertising
background image

T

une

r

25

GB

To change the AM tuning interval
(except for Russian model)

The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding x on the
unit, press TUNER/BAND on the unit. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.

Note

You cannot change the AM tuning interval in Power
Saving Mode (page 34).

Tip

To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available external
antenna.

You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 24).

1

Press TUNER BAND repeatedly to
select “FM” or “AM”.

2

Press PRESET + or – repeatedly to
select the desired preset station.

Listening to the radio

Frequency

Preset number

continued

Advertising