Sonic Alert Nokia phone 6021 - Manual (Page 53)

S e t t i n g s
40 Copyright © 2005 Nokia. All rights reserved.
The applications that may use packet
data are MMS, browsing sessions,
Push to talk, e-mail, remote SyncML,
Java application downloading, and
the PC dial-up.
To define how to use the service,
select
Menu > Settings >
Connectivity > Packet data > Packet
data connection .
Select When needed to set the
packet data connection to be
established when an application
needs it. The connection will be
closed when the application is
terminated.
Select Always online to set the
phone to automatically connect to
an packet data network when it is
switched on.
indicates a packet data
connection.
Modem settings
You can connect the phone using a
Bluetooth technology, IR, or a data
cable connection to a compatible PC,
and use the phone as a modem to
enable packet data connectivity
from the PC.
To define the settings for
connections from the PC, select
Menu > Settings > Connectivity >
Packet data > Packet data settings >
Active access point , activate the
access point you want to use, and
select Edit active access point . Select
Alias for access point , and enter a
nick name for the currently selected
access point. Select
Packet data
access point , and enter the access
point name (APN) to establish a
connection to an EGPRS network.
You can also set the dial-up service
settings (access point name) on your
PC using the Nokia Modem Options
software. See
”PC Suite” p. 70 . If you
have set the settings both on the PC
and on your phone, the PC settings
are used.
■ Enhancements
This menu is shown only if the phone
is or has been connected to a
compatible mobile enhancement.
Select Menu > Settings >
Enhancement settings . You can
select an enhancement menu if the
corresponding enhancement is, or
has been, connected to the phone.
Depending on the enhancement,
select from the following options:
Default profile — to select the profile
that you want to be automatically
activated when you connect to the
selected enhancement
Automatic answer — to set the
phone to answer an incoming call
automatically after 5 seconds. If
Incoming call alert is set to Beep
once or Off , automatic answer is off.