Sirius Satellite Radio ECD-T1540 - Manual (Page 11)

8
RADIO OPERATION
6 7
2 4 5 1
3
MANU/SKIP
P.SCAN
45W x 4
LOUD/
ENTER
VOLUME
S-MOD
SAT
CAT
SWITCHING TO RADIO MODE… … … … … … … … .… (1)
Press MOD button (1) to select radio mode, the radio mode appears in the display together with
the memory band and frequency.
SELECTING THE FREQUENCY BAND… … … … … ..(2)
At radio mode, press BND/LOUD/ENTER button (2) quickly to select the desired band.
The band will change in the following order:
FM1 FM2 FM3 AM
RADIO TUNING… … … … … … … … … … … … … … … … (3)
Press the MANU/SKIP or button (3) shortly to activate automatic seek function.
Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is
selected. If both buttons have not been pressed for several seconds, they will return to seek
tuning mode and “AUTO” appears on the display.
AUTOMATIC MEMORY
STORING & PROGRAM SCANNING… … … … … … … (4)
- Automatic memory storing
Press AS/PS/P.SCAN button (4) for several seconds, the radio searches for the six
strongest stations and stores them into the presets of the currently selected band. While
searching, ”LOC” appears on the display.
- Program scanning
Press AS/PS/P.SCAN button (4) shortly to scan preset station in memory
STORING PRESET STATIONS .................................(5)
The preset buttons (5) can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM)
for convenient access to your favorite stations.
• Programming stations ..... 1. Select the desired band, then tune in the station you want to
store in memory.
2. Press and hold one of the preset buttons (5) for more than 2
seconds until the corresponding preset button number appears.