Sagem my501Ci - Manual (Page 39)

Settings 39
Security
This menu allows you to configure your phone's security settings.
i-mode™ lock
This menu allows you to enter a code to have access to the i-mode™ function.
PIN number
This menu allows you to activate and modify your phone's PIN.
To modify the PIN, select Modify PIN code and [Select].
Enter old PIN and validate.
Enter new PIN twice and validate.
To activate or deactivate the PIN, select the Control PIN menu and [Select].
Enter PIN and validate.
Select Activate or Deactivate and validate.
PIN2 number
You have a second PIN number to allow you to access certain functions (*).
Proceed as above in order to activate, deactivate or modify PIN number 2 of your phone.
Phone code
The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is
activated, for example to protect the phone if stolen.
Select Check and [Select].
Enter 0000 (the factory code, by default) and validate.
Select Activate or Deactivate and validate.
To modify the phone code, select Modify and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
(*) These functions may or may not be available depending on your SIM card.
252786126_my501Ci_en.book Page 39 Mardi, 25. juillet 2006 3:00 15