Samsung BN68-01900M-01 - Manual (Page 17)

1
English
Basic O
per
ation
Basic Operation
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when
you wish to interrupt viewing temporarily (during a meal, for example).
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1
Press the POWERP button.
You can also use the POWERP button on the TV.
The message Select the OSD Language. is displayed.
2
Press the ENTERE button. Select the appropriate language by pressing the
▲ or ▼ button. Press the ENTERE button to confirm your choice.
3
Press the ◄ or ► button to select Store Demo or Home Use, then the
ENTERE button.
We recommend setting the TV to Home Use mode for the best picture in your
home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to
Home Use (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4
Press the ENTERE button. Select the appropriate country by pressing the
▲ or ▼ button. Press the ENTERE button to confirm your choice.
5
Press the ▲ or ▼ button to select Air or Cable, then press the ENTERE button.
Air: Air antenna signal.
Cable: Cable antenna signal.
6
Press the ▲ or ▼ button to select the channel source to memorize.
Press the ENTERE button to select Start.
When setting the antenna source to Cable, a step appears allowing you to
set a value for the digital channel search. For more information, refer to pages
19~20.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
After all the available channels are stored, the message Set the Clock Mode.
is displayed.
7
Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then press
the ENTERE button.
If you select Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not,
select Manual to set the clock.
8
The description for the connection method providing the best HD screen quality is
displayed. Check the description and press the ENTERE button.
9
Press the ◄ or ► button to select See Product Guide or Watch TV. Press the
ENTERE button.
See Product Guide: You are moved to the Product Guide where you can
view the introduction to the main functions of your new HDTV.
Watch TV: You can watch the set broadcasting channel.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Press the ENTERE button
at any time to interrupt the
memorization process.
■
1
Press the POWERP button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2
To switch your set back on, simply press the POWERP button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
■
■
Select the OSD Language.
Menu Language : English ▶
E Enter
Plug & Play
BN68-01900M-01Eng.indb 17 2009-04-13 �� 10:07:18