Samsung TRC-445 - Manual (Page 3)

3
WX/Alert Indicator — shows the CB is
ready to receive a weather alert signal.
RX/TX Indicator — shows whether the
CB is transmitting or receiving.
S/RF/SWR/CAL Switch — lets you
quickly select the display for the RF/sig-
nal meter (radio input/output signal pow-
er strength, standing wave ratio of the
antenna, or SWR calibration).
Universal Mounting Bracket — lets
you mount your CB securely in your ve-
hicle or on a desk or table in your home.
Note: To use this CB, you need a mobile
or base station antenna. Your local Ra-
dioShack store has a wide variety of an-
tennas. For more information, see
“Installing an Antenna” on Page 6.
We recommend you record your CB’s
serial number here. The number is on
the CB’s back panel.
Serial Number___________
FCC INFORMATION
The Federal Communications Commis-
sion (FCC) does not require you to have
a license to operate this CB. However,
the FCC does require that you read and
know Part 95 of
FCC Rules. These rules
apply to the operation of a Class D CB.
We have provided a copy of these regu-
lations with your CB.
Warning: Do not open your CB to make
any internal adjustments. Any internal
adjustments can be made only by an au-
thorized service technician.
Internal adjustments and/or modifica-
tions can lead to illegal operation as de-
fined by Part 95 of
FCC Rules. Such
illegal operation can lead to very serious
consequences.
To be safe and sure:
• Never open your CB’s case.
• Never modify your CB.
Your CB might cause TV or radio inter-
ference even when it is operating prop-
erly. To determine whether your CB is
causing the interference, turn off your
CB. If the interference goes away, your
CB is causing it. Try to eliminate the in-
terference by:
• Moving your CB away from the
receiver
• Contacting your local RadioShack
store for help
If you cannot eliminate the interference,
the FCC requires that you stop using
your CB.
21-1573.fm Page 3 Thursday, August 5, 1999 9:22 AM