Simplicity SA200 - Manual (Page 6)

5
FRONT VIEW
O
1 FACE COVER
Opens to provide access to the light bulb and the
presser foot pressure regulator.
O
2 BOBBIN WINDING TENSION DISC
Used when threading machine for bobbin winding.
O
3 THREAD TENSION DIAL
Controls the upper thread tension for proper stitch
formation.
O
4 REVERSE LEVER
Press this lever down and hold in place to sew in
reverse.
O
5 STITCH WIDTH SELECTOR DIAL
Sets the width of a stitch.
O
6 BOBBIN WINDER SPINDLE
Winds thread on a bobbin for lower threading.
O
7 HAND WHEEL
Turn the hand wheel toward you to raise the
needle up and down.
O
8 STITCH LENGTH DIAL
Sets the length of the stitch.
O
9 FREE-ARM COVER/ACCESSORY STORAGE
Provides a flat surface for most sewing. Remove
it to convert to free-arm sewing.
O
10 FEED TEETH (FEED DOGS)
The metal teeth under the needle plate that push
or feed the fabric through the machine.
O
11 PRESSER FOOT
Holds the fabric firmly against the feed teeth for
proper feeding.
O
12 PRESSER FOOT HOLDER
Holds the snap-on presser foot in sewing position.
The presser foot holder is removed when using
screw-on feet.
O
13 NEEDLE PLATE
Supports the fabric while sewing. Has seam guide
markings on right side.
O
14 PRESSER FOOT THUMB SCREW
Secures the presser foot or presser foot holder to
the presser foot bar.
O
15 NEEDLE CLAMP SCREW
Loosen to remove a needle; tighten to secure a
needle in position.
BACK VIEW
O
16 CARRY HANDLE
Simply lift to carry the Simplicity sewing
machine from one place to another.
O
17 PRESSER FOOT LEVER
Lift to raise the presser foot and release the thread
tension; lower to lower the presser foot and engage
the thread tension.
O
18 POWER CORD RECEPTACLE
Connect the three-prong power plug here.
O
19 MAIN SWITCH
Turns the main power and built-in sewing light
on or off.
O
20 RETRACTABLE SPOOL PINS
Raise the spool pins to hold the spools of thread.
KNOW YOUR SIMPLICITY SEWING MACHINE