Sony PCWA-A200 - Manual (Page 17)

17
To connect the Access Point to a DSL modem
Connecting the Access Point to a DSL modem provides Internet access
to computers that are using a Wireless LAN PC Card.
1
Connect the DSL modem and the Access Point with an Ethernet
cable.
2
Connect the AC power adapter (page 19).
Notes
• For DSL modem setup, refer to the manual supplied with your device.
• A category 5 Ethernet cable is recommended.
• Use a flexible Ethernet cable when attaching a unit stand to the Access Point.
Using an inflexible cable will not allow you to attach the unit stand.
LINE/
PHONE
DC IN 5V 10BASE-T
To 10BASE-T connector
To the DSL modem
DSL modem
Ethernet cable
(not supplied)