Using the rs 180, Switching the transmitter on and off – Sennheiser 502875 User Manual
Page 20
19
Using the RS 180
Using the RS 180
To switch the product on and to listen to your sound source, proceed as
follows:
Switching the transmitter on and off
Switching the transmitter on
̈
Press the multi-function button
ቤ
for approx. 1 second.
The transmitter switches on. The multi-function button
ቤ
flashes
green, indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED
µ
of the headphones and the multi-function button
ቤ
of the
transmitter flash slowly.
Sequence of steps
Page
1. Make sure that the rechargeable batteries are charged.
17
2. Switch your sound source on.
–
3. Switch your transmitter on.
19
4. Switch your headphones on.
21
5. Adjust the desired volume.
22
1s
5s
3
µ