Sony SPP-M937 - Manual (Page 19)

19 US Basics
Basics
To obtain the best speakerphone performance
• You may not be able to hear the other party's voice in a noisy place.
Therefore, use the speakerphone in a quiet room.
• Do not bring your hand or other object too close to the microphone
or you will hear a shrill noise (“feedback”).
• When the speaker volume is loud, or the telephone has been placed
close to a wall, you may find that the volume drops suddenly. This is
due to a circuit in the telephone designed to protect against
feedback. In such cases, lower the speaker volume slightly.
Redialing
1
Press (LINE 1) or (LINE 2) to select the line.
The corresponding line button lights up.
2
Press (REDIAL/PAUSE) to redial the last number dialed.
Notes
• If the last number dialed exceeds 20 digits, only the first 20 digits are dialed.
• The number last dialed cannot be stored separately for each line. It is the very
last one you have dialed using either line.
• The number last dialed can be stored separately for the handset and the base
phone.
Making another call while talking
Example: Making a call on line 2 while talking on line 1
1
Press (HOLD) while talking.
The line 1 is put on hold and the LINE 1 button flashes
slowly.
2
Press (LINE 2).
3
Dial a phone number for the second party.
Now you can talk to the second party on line 2.
Tip
Even if you do not press (HOLD) in step 1, the line is put on hold by pressing
(LINE 2).
You can talk with two parties at the same time using both line 1 and
line 2, see “Having a conference call” on page 34.