Sierra Wireless Compass 597 User Manual
Page 29
Document 2130972. Rev 1.0 Apr.08
29
3.
If a window appears, prompting you to enter your
password, enter your Mac password, and then click
OK
.
Watcher Lite displays a status message or the “Activation
Assistant” window.
4.
Use the following table to determine your next actions.
Table 4-1: Text/window displayed, and your next
action
Text/window
displayed
Description/next action
“Disconnected”
Your device is preactivated. You are ready to
connect to the network. Proceed to
“Device is Locked”
Your device is preactivated. Unlock the device:
1.
If the Unlock Device window is not
displayed: from the
Extras item on the
Sierra Wireless Watcher menu, choose
Unlock Device.
2.
In the Unlock Device window, enter the
lock code (PIN), and click
OK.
If you can’t recall your lock code, try using the
last four digits of your device’s phone number or
try 0000. If none of these work, contact your
service provider.
Once your device is unlocked, you are ready to
connect to the network. Proceed to
“Activation
Assistant” window
Your device is not activated.
1.
Click
Continue to indicate that you’d like to
activate your device.
Watcher Lite will display “Activating Sierra
Wireless Compass 597 EVDO Modem
Device.”
Wait until the process is completed.
If provisioning is successful, Watcher Lite
displays “Disconnected,” after which you
are ready to connect to the network.
Proceed to
2.
If the Device Activation Failed! window is
displayed, use the Activation Assistant
(see
).
“Not activated”
Your device is not activated. Use the Activation
Assistant (see