SUUNTO X6 - Manual (Page 13)

11
not set to the off position. The backlight stays on as long as a selection is active and
5 seconds after the last selection. For more information about backlight settings,
see page 20.
2.2.3. Stop/CL Button
Short press
• Returns to the previous menu level or to the previous selection without accepting
the selection.
• In the Chrono mode, it stops timing.
• In the main displays, it acts as a shortcut button, that toggles the lowest field of the
main display between three different alternatives. The selection stays active even
if the mode or menu level is changed.
Long press
• Returns to the main display of the current mode without accepting the last selec-
tion. In the Chrono mode, it resets the stopwatch.
2.2.4. Suunto Button
Short press
• Scrolls to a lower menu level.
• Accepts the selections made with arrows and moves to the next phase.
• After the last selection, it returns to the Set menu.
• With two possible selections (e.g. light On/Off), it activates the selection and
accepts the selections made with arrows.
Long press
• Returns to the main display of the current mode and accepts the selection.