Samsung MAX-VL45 - Manual (Page 10)

GB
10
Your system is equipped with a clock which allows you to turn your
system on and off automatically. You should set the clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from
winter to summer time and vice verse.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock twice.
Result:
CLOCK is displayed.
Press Return only on the front panel.
Result: The hour flashes.
To... Turn the Multi Jog knob to the...
Increase the hours Right
Decrease the hours Left
When the correct hour is displayed, press Return only on the front
panel.
Result: The minutes flash.
To... Turn the Multi Jog knob to the...
Increase the minutes Right
Decrease the minutes Left
When the correct time is displayed, press Return only on the front
panel.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
You can also use / buttons to instead Multi Jog
knob in step 4, 6.
You can view the various functions available on your system.
Press the Demo button.
Result: The various functions available are listed in turn on the dis-
play.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sec-
tions.
To cancel this function, press Demo again.
Setting the Clock
1
2
3
4
5
6
7
2
1
4,6
3,5,7
4,6 4,6
Viewing the Various Functions on Your
System
2
1
MAX-VL45GB-1~18 11/12/02 1:43 PM Page 10