Sony KV-28FX66U - Manual (Page 19)

19
GB
NexTView*
* (depending on availability of service).
NexTView is an on-screen electronic programme guide, providing you with programme
information for different broadcasters.
When looking for information you can search by theme (sports, art, etc...) or date.
If wrong characters appear when viewing NexTView, use the menu system to enter the
“Language” menu (see page 14) and select the same language as the NexTView is
broadcasted.
Displaying NexTView
1 Select a broadcast channel providing a NexTView service. In this case the indication
“NexTView” is displayed as soon as data is available.
2 To see NexTView service you have two different types of NexTView interface. These depend
on the % of available data:
a) “Programme List” interface:
Whilst you are watching TV, and after the indication “NexTView” (coloured white)
is displayed on the screen, press the button on the remote control to watch the
“Programme List” interface (see fig. 1).
b) “Overview” interface:
Whilst you are watching TV, and after more than 50% of NexTView data is available
(100% data may not be available depending on the area) the indication “NexTView”
(coloured black) is displayed on the screen. Press the button on the remote
control to watch the “Overview” interface (see fig. 2).
As soon as you enter the NexTView service the % of NexTView data available will be
shown in the bottom left corner of the screen. Once you have entered the service, the %
of data will not increase.
3 To navigate through NexTView:
• moving right or left press or .
• moving upwards or downwards, press or .
• to confirm a selection, press OK.
4 To switch NexTView off, press the button on the remote control.
“Programme List” interface (fig. 1) :
Icons for different themes
(see the “Icons’ key” section
on the next page)
Date
Programme list
* ”Record” and “Remind” options will be shown on the screen as soon as a programme has
been selected, but they will not be shown if you are watching a TV channel which is not
a NexTView provider.
*
”Record” and “Remind” will not be available if the programme that you have selected has
already started.
NexTView
Record * :
This function only works if you have
connected a VCR which supports SmartLink
and Timer Programming feature.
If you wish to record the selected programme,
press the red button on the remote control.
Remind * :
If you wish to be reminded when the selected
programme is broadcast, press the green
button on the remote control. At the time that
the programme should be broadcast a
reminder message is displayed on the TV.
continued...
03GBKV28FX66U.fm Page 19 Wednesday, January 15, 2003 5:44 PM