Sony VPCS1 - Manual (Page 2)

VPCS1 Series Optical Disk Drive
Replacement Instructions
P/N 989201343 Rev. B 2/4
Step 4. Slide the Hard Drive Door away
from the unit, and lift to remove. Step 5. Locate the Optical Disk Drive
(ODD) Bay. Step 6. Using the enclosed magnetic
screwdriver, remove the (2) screws
securing the ODD Bay.
Put aside the ODD Bay screws for
later in the procedure.
ODD Disassembly
(Steps 9-11)
Step 7. Insert the enclosed screwdriver
in the notch exposing the ODD Bracket
(metal). Push to remove the ODD. Step 8. Carefully remove the ODD from
the unit.
Step 9. Identify the (4) side screws
that secure the ODD brackets to the
ODD.
ODD Assembly
(Steps 12-15)
Step 12. Take the new ODD and
bezel provided in the CRU kit and
prepare for assembly.
Step 10. Remove the screws &
brackets. Step 11. Arrange the brackets &
screws as shown above, and then set
the old ODD aside.
R
B