Connecting the monitor – Siemens S7 User Manual

Page 9

Advertising
background image

Colour monitor S7

A26361-K877-Z100-4-5E19

English - 7

Installation/Deinstallation of the loudspeaker module

Installation

Ê

Align the loudspeaker module that the two
hooks slot into the two openings on the
bottom of the monitor.

Ê

Engage the loudspeaker module

Deinstallation

Ê

Press the two push-buttons on the rear of
the loudspeaker module and remove it
downward.

Connecting the monitor

Information on the computer connections and interfaces is contained in the operating manual for
your computer.

!

Observe the "Safety" in the chapter "Important notes" in this operating manual.

The thermal dissipation on the rear wall of the casing must not be prevented by shielding.
Therefore, make sure that the distance to the wall or pieces of furniture is long enough.

1

3

2

4

1 = Connector for the power supply
2 = D-SUB connector
3 = Audio IN
4 = Audio IN

Ê

Be sure that the monitor and the computer are switched off.

!

The computer power plug must be pulled out!

Advertising