Sanyo DC-MX40i - Manual (Page 9)

Mono/stereo select (on the remote control)
You can select the MONO/STEREO only in FM mode.
1. When you want to select FM stereo station, press the ID3/MONO/ST. button on the remote control.
When you receive a FM stereo station the " " indicator will appear on the display, you can receive
FM stereo transmission .
2. When you press the ID3/MONO/ST. button on the remote control again, the FM STEREO indicator will
turn off and switch to MONO FM status.
Programming preset stations
You can also preset stations of your choice and store up to10 AM and 30 FM stations in its memory. To
store your selected broadcasting stations:
1. Press the BAND button on the unit(or remote control) to toggle between AM and FM to make your
selection.
2. Tune to the desired station.
3. Press the MEM/C-ADJ./iPod button.
4. Press the PRESET/FOLDER (Up or DOWN) button
on the remote control for your desired station
number.
5. Press the MEM/C-ADJ./iPod button again to confirm your selection.
6. To program more stations into memory, repeat the above steps 2 to 5.
7. To change the stored preset stations, repeat the above steps 2 to 5.
Note: Storing a new station into a preset location will erase the previously stored station in that location.
Selecting the Preset Stations
1. Press the BAND button to select the desired band.
2. Press the PRESET/FOLDER (UP or DOWN) button
on the remote control to select the desired preset
station number.
3. The location number of preset station is displayed along with the corresponding frequency.
FM Antenna
For better FM reception change the position of FM antenna wire.
7
CD/MP3/WMA OPERATION
Listening To Compact Disc (CD/MP3/WMA)
1. If you want to enjoy CD/MP3, press the CD DOOR OPEN( ) button once on the unit first, and then the
CD door will open automatically.(F3)
2. Insert the CD or MP3 disc into the CD compartment, press the CD door to close it.
3. Press the FUNCTION button to select CD mode. The unit will read the CD/MP3/WMA disc automatically.
Note: (1) This unit can play CD, CD-R, CD-RW, MP3 and WMA discs.
(2) It can read " 8 cm " and " Multi Section " of MP3 DISC.
(3) The "Playback Transfer Rate" in MP3 and WMA.
a. In MP3, transfer bit rate : 8 - 256 kbps.
b. In WMA, transfer bit rate : 8 - 192 kbps.
(4) The "Max Readable 99 folders and 999 tracks".
(5) If no disc or can`t read TOC, NO DISC will be displayed.(F4)
Playing The Entire CD/MP3/WMA
- CD
1. Insert the CD disc into the CD compartment, and then press FUNCTION button to select CD mode, t he
main unit will automatically read the total number of the tracks at the same time.
2. Press /ENTER button, the unit will play the first track of the CD disc automatically.(F5)
3. Press /ENTER button once again, the time elapsed indicator will flash.(F6)
4 . Press or button once to change Track NO., and press and hold or button to skip
fast backward or forward of each song.
5. To resume playback, press /ENTER
button once more again.
6. To stop playback, press /MENU button once.
IMPORTANT INFORMATIONS
- Copyright protection files cannot be played back.
- Copyright protection files on a disc are skipped automatically when played back.
F3 F4