Samsung SCC-B9373 - Manual (Page 8)

04_
installation
CAMERA INSTALLATION
Zoom and Focus Lever
- Loosen the Levers and adjust Zoom/Focus
After controlling, tighten each lever.
1. Zoom Lever
- To widen the viewing angle, turn the “Zoom Lever” to “W”(Wide)
- To obtain a closer view, turn this Lever to “T” (Tele).
2. Focus Lever
- To adjust the Focus between “N” (Near) or “ ” (Far) until the sharpest focus is achieved.
3. Ring Guide Bolt
• Be carefull not to lose these small bolts (3pcs) which should not be touched in normal
use.
4. DC Level Volume Screw Cap
• Remove this screw Cap carefully. Retain it in a safe place,
as it must be replaced to protect from water entering the camera body.
• The DC level volume for the adjustment in the screw hole.
- For a bright screen, turn the DC Level Volume slowly towards “H” (counter-clockwise) with the
driver provided.
- For a dark screen, turn it towards “L” (clockwise).
• Then tighten the screw Cap to protect water entering
5. Service Video Port Description
•
installation
250mm
01-SCC-B9373-NA_ENG.indd 4 2008-04-17 오전 11:46:22