Samsung DS-5012L - Manual (Page 30)

Configuring the IP Phone DS/ITP-5012L Phone User Guide
17
4. Setting System Authentication
Information
This function is used to set the IP address of the system connected to the IP
phone, and the authentication ID and password of the IP phone. The ID and
password are used only when setting up the IP phone and are not required
while operating it.
1.
Use the [
^
] and [ V ] buttons to move to
the [5. Server] menu and press
the [Enter] button.
2.
The submenus are displayed.
z
If the system is set to request the ID
and password of the IP phone, [2. ID]
and [3. Password] should be entered
.
3.
The [1. Server IP] menu is used for
verifying or changing the IP address
of the system. Verify the current IP
address of the system. To change the
IP address, enter a new address and
press the [Enter] button.
[2. ID] and [3. Password] are user
information required for connecting
to the system.