Samsung VGA1000 - Manual (Page 29)

Section 2: Understanding Your PCS Phone
2A: Your PCS Phone - The Basics
21
Using One/Two/Three Touch Speed Dialing
With this feature, you can automatically call Speed Dial entries
using one key press for locations 1-9, two key presses for
locations 10-99, or three key presses for locations 100-300.
To use One-Touch Dialing for Speed Dial locations 1-9:
ᮣ Press and hold the appropriate key for a few seconds. The
display confirms that the number has been dialed when it
shows Calling.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for a few seconds. The
display confirms that the number has been dialed when it
shows Calling.
To use Three-Touch Dialing for Speed Dial locations 100-300:
1. Press the first digit.
2. Press the second digit.
3. Press and hold the third digit for a few seconds. The
display confirms that the number has been dialed when it
shows Calling.
Dialing Options
When you enter numbers using the keypad, you can press to
display your dialing options.
Note: If less than four numbers are entered, the first choice in the menu
option is Speed Dial. When four or more numbers are entered, the
following menu options are displayed.
To select an option press the number on the keypad that
corresponds with the desired choice.
ᮣ
(1) Talk is used to dial the phone number. (If you are
roaming and have the Call Guard feature activated, you must
then press
. (See "To Place Roaming Calls With Call
Guard On:" on page 52.)
ᮣ
(2) Save to save the phone number in your Internal
Phone
Book. (See "Finding Internal Phone Book Entries" on
page 75.)