Samsung DV431AG - Manual (Page 34)

34_ Appendix
troubleshooting
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY MEANING SOLUTION
tS
Clogged Lint Screen
Vent is restricted Clean the screen or vent.
If the problem continues call for service.
tO
dO Running the dryer with door open
Close the door and then restart.
If the problem continues call for service.
dF Door is not closing properly Call for service.
bE2
Invalid state of key circuit short for
30secs
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continues call for service.
oD Invalid Dry time Call for service.
hE Invalid heating Temp Call for service.
Et
EEPROM is not communicating
properly Try restarting the cycle.
If the problem continues call for service.
FE Invalid power source Frequency
Try restarting the cycle.
If the problem continues call for service.
AE
Electronic Control Problem
(Communication Error)
Call for service.
2E
Electronic Control Problem
(Over Voltage Error)
Call for service.
For any codes not listed above, call 1-800-SAMSUNG(726-7864).
DV431AEP-03021A-01_EN.indd Sec8:34 DV431AEP-03021A-01_EN.indd Sec8:34 2011-01-26 3:47:26 2011-01-26 3:47:26