Recording to a tape – Sony CMT-EP50 User Manual

Page 14

Advertising
background image

14

Steps

Recording from a CD

(CD Synchro Recording)

Recording from the radio

1

Load a blank tape.

2

Press CD.

3

Load the CD you want to record.

4

Press

z

.

The deck stands by for recording.

5

Press

nN

, if you want to switch the direction.

6

Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select

g

to record on one side,

h

to record on both sides.

7

Press

z

again.

Recording starts.

Recording to a tape

–– CD Synchro Recording/Recording Manually

You can record from a CD or radio. You can use TYPE I (normal) tape.

To stop recording

Press x.

Tips

• For recording from a CD to a tape manually, you

can press . m or M > to select tracks
during recording pause mode (after step 4 and
before step 6).

• When you record on both sides, be sure to start

from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.

• When an AM program is noisy, set ISS to select the

position that most decreases the noise.

Press TUNER (TUNER/BAND on the
remote).

Tune in the station you want to record.

Advertising
This manual is related to the following products: