Samsung BL1050 User Manual
Page 91
90
FAQ
Ê
When the DirectX 9.0c or later is not installed
Ã
Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
Ê
If a PC connected with the camera stops responding while
Windows is starting.
Ã
In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’
t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
Ê
If the movie clip can’t be deleted, or the removable disk can’t be
extracted or an error message displays during the file transfer.
Ã
If you install only the Samsung Master, the problems
mentioned above occasionally happen.
- Close the Samsung Master program by clicking the Samsung
Master icon on the Taskbar.
- Install all the application programs included in the software CD.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to effectively
communicate Samsung’s environmental friendly product
activities to the consumers. The mark represents Samsung’
s continuous effort on development of environmental
conscious products.