Sharp Aquos LC 15B2UA - Manual (Page 16)

15
A V 2
COMPON E N T
1 2
A V 1
BASIC OPERATION (Continued)
Control section of main unit
1
Press MAIN POWER, located on
the upper side of the main unit, to
on.
2
The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
▼ On-screen display
2
STEREO
SAP
MONO
Turning on POWER
Notes:
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes
Note:
■ The input mode indication disappears
after several seconds.
AV1 mode
AV2 mode
TV mode
1
Turn on the power of the connected
video equipment.
2
Press TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2, COMPONENT
or TV mode each time TV/VIDEO is
pressed.
■ The AV input mode indication remains
for 3 seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-Video input terminal is
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2: AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 24.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
Note:
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP BRIGHT
MENU
MUTE TV/VIDEO
CH VOL
FLASHBACK
MAIN POWER
POWER indicator
POWER SLEEP
COMPONENT mode
POWER
TV/VIDEO