Sunway GSM 900 - Manual (Page 25)

This is the Internet version of the user's guide. © Print only for private use.
25
Calling
Before voice dialing
You must first activate the voice dialing function
and record your voice commands. An icon appears
next to a phone number that has a voice command.
To activate voice dialing and
record names
1 } Settings } the General tab } Voice Control
} Voice Dialing } Activate } New Voice Cmd.
and select a contact.
2 If the contact has more than one number,
use
and to view the numbers. Select
the phone number to which you want to add
the voice command. Now you are going to
record a voice command such as “John mobile”
for the phone number you selected.
3 Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that you
want to record. The voice command is played
back to you.
4 If the recording sounds ok } Yes . If not } No
and repeat step 3.
5 To record another voice command for a contact
} New Voice Cmd. again and repeat steps 2-5
above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings } the General tab } Voice Control
} Play Caller Name .
Voice dialing
You can voice dial by saying a prerecorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, a Bluetooth
headset or by saying your magic word.
To make a call from the phone
1 From standby, press and hold one of the
volume buttons.
2 Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
“John mobile”. The name is played back to
you and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button,
or Bluetooth headset button.