Sharp PG-C30XU - Manual (Page 14)

E-13
Setup & Connections
Connecting the Projector
To a DTV decoder or DVD player
1 Connect one end of the HD-15-RGB cable to the INPUT 1 or
2 port on the projector.
2 Connect the other end to the corresponding terminals on the
video source.
3 To use the built-in audio system, connect one end of the audio
cable (sold separately) to AUDIO INPUT terminal for INPUT
1, 2 on the projector.
Connect the other end to the Audio output terminal on the
video source.
Select “Computer/RGB” or “Component” for “Signal Type” on
the GUI menu, depending on the video source.
HD-15-RGB cable (sold separately)
To audio output terminals
DTV decoder
or
DVD player
2 To video input terminals
Audio cable (sold separately)
Connecting an amplifier and other audio components
Amplifier
Audio cable (sold separately)
To audio input terminals
CAUTION
• Always turn off the projector while connecting to audio
components, in order to protect both the projector and the
components being connected.
• By using external audio components, the volume can be
amplified for better sound.
• The AUDIO OUTPUT terminal allows you to output audio to audio
components from the selected AUDIO INPUT terminal for INPUT
1, 2 or AUDIO INPUT 3 terminals connected to audiovisual
equipment.
PG-C30XU/CD (E)-b 00.5.19, 3:45 PM 13