Salton, Inc WT51GY - Manual (Page 9)

8
MEMORY CD PLAY FUNCTIONS
The CD Player can be programmed to play up to 20 tracks in the
order desired.
1. Press the POWER Button to turn ON, and insert a disc.
2. Before setting, CD PLAY Function should be set to STOP Mode.
3. Press MEMORY Button to select program mode, MEMORY
Indicator appears on the LCD Display and TRACK & MEMORY
Indicator are flashing. The LCD Display shows:
NOTE: If Button is not pressed for several seconds, the
MEMORY PROGRAM Mode is released automatically. If this
occurs before you have completed programming, simply press
MEMORY again to advance to where you left off.
4. Press SKIP
᭤᭤
l (Forward) Button to select track number
into memory.
5. Press MEMORY Button to store the track.
6. Repeat steps 4 - 5 to program additional tracks up to a
maximum of 20 tracks.
7. Press PLAY/PAUSE
᭤
lI Button to start MEMORY Play. The CD
Player will play back the tracks in the order programmed.
IMPORTANT: If the STOP KEY (
᭿ ) is pressed at any time
during Steps 3 - 6 then all memory is cleared.