SoundFreaq SFQ-01 - Manual (Page 11)

.10.
Playing back from iPhone/iPod
Setting an iPhone/iPod on the Unit
 Compatible iPod Players: Most Apple iPod
models with 30-pin dock connectors as
follows: iPod nano 5th generation (video
camera), iPod nano 4th generation (video),
iPod nano 3rd generation (video), iPod nano
2nd generation (aluminum), iPod nano 1st
generation, iPod 4th generation (color
display), iPhone 3G/3GS, iPhone 4, iPod
classic, iPod 5th generation (video), iPod 4th
generation, iPod touch 1st generation, iPod
touch 2nd generation, iPhone, iPod mini.
1. Select the appropriate dock adapter made
for your iPhone/iPod.
 Use one of the supplied dock adapters or your
own from the Apple Inc.
 An identification number is marked on the
dock adapter.
iPod Touch
iPhone 3G/3GS
14
15
Identification
Number
iPod Models Supported
Supplied
Dock adapter
 It is recommended to use an appropriate
dock adapter to protect your iPhone/iPod.
2. Insert the dock adapter as illustrated. The
small slot at the dock adapter should be at
the backside.
a. Match the dock adapter tabs to the front
holes in the cradle.
b. Press the other side onto the cradle until
a click sound.
a
Remove the iPod
dock adapter with
your fingernail by
using the slot.
3. Connect your iPhone/iPod. Make sure the
connector plug of unit is firmly inserted into
the connector port of iPhone/iPod.
Notes:
 Always set volume to the minimum when
connecting or disconnecting the other
equipment.
 When you connect your iPhone/iPod to unit,
make sure you insert it all the way.
b
Slot
*
Listening to an iPhone/iPod
1. Press the " " button to power on the system
from standby mode.
2. Select "iPod" mode with the SOURCE button.
3. When iPhone/iPod is selected as the sound
source, it automatically starts playback.
LCD Display
LCD Display