Sony WX-C570 - Manual (Page 8)

8
EN
3
Press the desired preset number button
((1) to (6)) for two seconds.
The selected preset number appears on the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Receiving memorized
stations
1
Press (TUNER) repeatedly to select the
band.
2
Press the preset number button ((1) to
(6)) momentarily on which the desired
station is stored.
Tip
Press either side of (PRESET/DISC) to receive the
memorized stations in order (Preset Search Function).
If you cannot tune in a preset
station
Press either side of (SEEK/AMS) to search
for the station (automatic tuning).
Scanning stops when a station is received.
Repeat until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(BTM/SENS) to light up “LOCAL” on the display (local
seek mode). Only the stations with relatively strong signals
are be tuned in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).
If FM stereo reception is poor
— Monaural Mode
Press (BTM/SENS) momentarily until
“MONO” appears.
The sound improves, but becomes
monaural (“ST” disappears).
To go back to the normal mode, press again
until “MONO” disappears.
Changing the displayed items
Each time you press (DSPL), the items
alternate between the frequency and time.
Radio
Memorizing stations
automatically
— Best Tuning Memory (BTM)
This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
PREVENTING ACCIDENTS!
When tuning in while driving, use the
automatic tuning or memory preset search
function instead of manual tuning.
1
Press (TUNER) repeatedly to select the
band.
Each time you press (TUNER), the band
changes as follows:
FM1 n FM2 n AM1 n AM2
2
Press (BTM/SENS) for two seconds.
Notes
• The unit does not store stations with weak signals on the
preset number buttons. If there are only a few stations
received, some preset number buttons remain empty.
• When a preset number indicated on the display, the unit
starts storing station from the one currently displayed.
Memorizing only desired
stations
Up to 6 stations on each band (FM1, FM2,
AM1 and AM2) can be stored using the preset
number buttons. Therefore, 12 FM and 12 AM
stations can be memorized.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
1
Press (TUNER) repeatedly to select the
band.
2
Press (SEEK/AMS) to search for the
station you wish to store on a preset
number button.