Additional i nf or ma tion, Usb device – Sony 3-097-194-15(1) User Manual

Page 85

Advertising
background image

CMT-DH3.GB.3-097-194-11(1)



GB

Additional I

nf

or

ma
tion

The disc title, album title, track title

and DVD-TEXT characters do not

appear properly.
 Use a disc that conforms to the

ISO 9660 Level 1, Level 2, or Joliet

(expansion).

 The character code that can be

displayed by this system are as follows:

Upper cases (A to Z)

Lower cases (a to z)

Numbers (0 to 9)

Symbols (< > * +,  / [ ] _)

Other characters may not be displayed

correctly.

The surround effect is difficult to hear

when you are playing a Dolby Digital

or MPEG audio sound track.
 Check the speaker connections

(page 18).

 Depending on the DVD VIDEO, the

output signal may not be the entire 5.1

channel. It may be monaural or stereo,

even if the sound track is recorded in

Dolby Digital or MPEG audio format.

The sound loses stereo effect when

you play back an AUDIO CD, VIDEO

CD, MP audio track, DivX video file

or DVD VIDEO.
 Make sure the system is connected

properly.

 Unplug the microphone or press

KARAOKE MODE

repeatedly until

“KARAOKE MODE: OFF” appears on

the TV screen.

USB device

Are you using a supported USB

device?
 If you connect an unsupported USB

device, the following problems may

occur. See “Playable USB devices”

(page 103) for the supported device

types.

 The USB device is not recognized.

 File or folder names are not

displayed on this system.

 Playback is not possible.

 The sound skips.

 There is noise.

“Over Current” appears.
 A problem has been detected with the

level of electrical current from the

(USB) port

. Turn off the system and

remove the USB device from the

(USB) port

. Make sure there is no

problem with the USB device. If this

display pattern persists, contact your

nearest Sony dealer.

There is no sound.
 The USB device is not connected

correctly. Turn off the system, then

reconnect the USB device and check if

the USB MEMORY indicator

lights

up.

The sound is distorted.
 The bit rate used when encoding the

files was low. Send files encoded with

higher bit rates to the USB device.

Continued

Advertising