Stanton T.62 - Manual (Page 3)

2
Thank you for purchasing the T.92 USB turntable from Stanton. The T.92 USB has been designed to allow easy transfer of vinyl records to CD or Mp3. The
T.92 USB is built upon Stanton's heritage of designing audiophile products for the most discriminating listener. Before assembling the T.92 USB please
check to make sure the following items are included with the main unit in the carton.
yCakewalk Pyro Installation CD
yAC cord
yRCA cable
yUSB cable
y45 rpm adaptor
yCounter weight yPlatter
ySlipmat
yCloth dust cover
yInstruction manual
yStanton 500.V3 Cartridge pre-mounted on headshell
After confirming that all of the above parts are included in the box, its time to assemble the turntable.
1) Remove the platter from its protective wrapping and place on the spindle of the main unit.
2) Remove the slipmat from its protective wrapping and place on the platter.
3) Place the counter-weight on the back of the tonearm assembly.
1. Connect the power cord to an AC outlet.
!
2. Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting the phono/line switch at the rear of the turntable to
Line.
CONNECTIONS
ASSEMBLY
Visit www.stantondj.com for downloadable updates, videos, and news about this product.
T.92 USB T.92 USB
Set the phono/line switch to “LINE”.
Set the phono/line switch to “PH”.