Sprint Nextel 755P - Manual (Page 118)

112 Safety
Specific Absorption Rate (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the
head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring, and calculation
process. It does not represent how much RF the phone emits. All phone models are tested
at their highest value in strict laboratory settings. But when in operation, the SAR of a
phone can be substantially less than the level reported to the FCC. This is because of a
variety of factors including its proximity to a base station antenna, phone design, and other
factors. What is important to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial margin of
safety. As stated above, variations in SAR values between different model phones do not
mean variations in safety. SAR values at or below the federal standard of 1.6 W/kg are
considered safe for use by the public.
The highest reported (FCC) SAR values of the Treo 755
P
Smart Device by Palm are:
The highest reported (FCC) SAR values of the Treo 755
P
Smart Device by Palm on the
Sprint Power Vision Network (EVDO mode) are:
Maximum SAR Values CDMA Cellular CDMA PCS
Held to Ear 1.07 (W/1Kg) 1.46 (W/1Kg)
Body-Worn .89 (W/1Kg) .33 (W/1Kg)
Maximum SAR Values EVDO Cellular EVDO PCS
Body-Worn 0.887 (W/1Kg) 0.303 (W/1Kg)