Sharp LL-191A - Manual (Page 11)

11
English
1. AUTO button ............................ This button is used to perform automatic adjustment of the screen
(CLOCK, PHASE, H-POS and V-POS). (p.18)
2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen
Display) Menu.
3. / MODE button ..................... When the OSD Menu is displayed:
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
4. buttons ............................. When the OSD Menu is displayed:
These buttons are used to select an option or adjust the value of the
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness and speaker
volume.
5. Speakers .................................. Audio entering via the external device connected to the monitor can
be heard.
6. Headphone terminal ............... Headphones (commercially available) can be connected here.
7. Power button ............................ Pressing this button turns the power on.
Press the button again to turn the power off.
8. Power LED ............................... This LED is lit green when in use and orange when in power-saving mode.
9. Main power switch
10. Power terminal
11. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable
included should be used.
12. Audio input terminal ................ A computer's audio output terminal can be connected here. The audio
cable included should be used.
13. Security lock anchor ................ By connecting a security lock (commercially available) to the security
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
14. Ventilation openings ............... Never block the ventilation openings as this may lead to overheating
inside the monitor and result in malfunction.
Product description
191A_gb.P65 12/15/2003, 5:27 PM 11