Sony BDP-S350 - Manual (Page 27)

27
Ho
oku
p
s a
nd
Set
tings
To control other TVs with the remote
You can control the volume, input source,
channel, and power switch of non-Sony TVs
as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
b
If you enter a new code number, the code number
previously entered will be erased.
1
While holding down TV [/1, enter the
TV’s manufacturer code using the
number buttons.
For instance, to enter “09,” press “0” then
“9.”
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
2
Release TV [/1.
Step 7: Easy Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player. If you do not complete Easy Setup, it
will appear each time you turn on your
player.
Make the settings below in the following
order.
1
Turn on the TV.
2
Press [/1 to turn on the player.
The player turns on after a moment.
3
Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
The display for OSD language selection
appears.
• If the display for OSD language
selection does not appear
Press HOME, and select “Easy Setup”
in the “Setup” setup (page 52). Then,
select “Start,” and press ENTER.
Manufacturer Code number
Sony 01 (default)
Hitachi 02, 04
LG/Goldstar 04
Mitsubishi/MGA 13, 04
NEC 04
Panasonic 19
Philips 21
Pioneer 16
RCA 10, 04
Samsung 20, 04
Sharp 18
Toshiba 07, 18
When turned on for the first time
Wait for a short while before the player
turns on and starts Easy Setup.
[/1
</M/m/,,
ENTER
RETURN
TV [/1
HOME
,continued