Sony 3-452-775-11(1) - Manual (Page 29)

29
Ho
oku
p
s a
nd
Set
tings
b
If the picture is distorted or no picture appears,
wait for about 30 seconds without pressing any
buttons. The display returns to the resolution
setting screen.
If the selected video output resolution is
incorrect, no picture appears on the screen
when you press any button in 30 seconds. In
this case, press x on the player for more than
10 seconds to reset the video output resolution
to the lowest resolution. To change the video
output resolution, set “Output Video Format”
in the “Video Settings” setup (page 42).
8
Select an aspect ratio that matches
your TV, and press ENTER.
Select “16:9” when connecting to a wide-
screen TV or a TV with a wide mode
function.
Select “4:3” when connecting to a 4:3
screen TV without a wide mode function.
9
(Only when connecting your TV using
the HDMI cable)
Set the “Control for HDMI” function to
“On” or “Off,” and press ENTER.
Select “On” to use the “Control for
HDMI” function when connecting Sony
components that are compatible with the
“Control for HDMI” function (page 16).
If you do not use the “Control for HDMI”
function, select “Off.”
10
Select “Finish,” and press ENTER.
z
• You can reset settings to their factory settings
(page 53).
• You can run “Easy Setup” again from “Easy
Setup” in “Setup” (page 53).